The Bad System Config Info error can be brought about by various variables, including a flawed framework setup. There can be an assortment of issues, going from broken frameworks in all cases, including the Windows Registry, to defective drivers, degenerate framework records or framework document debasement, to bombed equipment or undermined gadget drivers.
In the event that it isn’t working, you ought to have the option to view and duplicate your records as it ought to show up as a different drive on the PC to which you associate it. Bad System Config Info appears on Windows frameworks because of a breakdown of the framework and vault records or the Boot Configuration Data document.
Contents
How To Fix ‘Bad System Config Info’ Error In Windows 10
Here are some easy alternatives that fix the ‘Bad System Config Info’ Error in Windows 10.
Following are the primary ways for fixing as quickly as possible:
Method 1: Check Your RAM and Hard Drive
A Bad System Config Info error can appear due to damage in the hard disk or corrupted. Command Prompt to check and repair hard disk errors may resolve the issue.
In situations where you are unable to boot into Windows, then you can access CMD by using Windows installation media.
Step 1 : Insert Windows installation DVD or CD in your computer in order to reboot your system.
Step 2 : Next you will see the Welcome screen, just click “Next” followed by “Repair your computer”.
Step 3 : Then click on “Troubleshoot”, and then “Advanced Options” and lastly “Command Prompt”.
Step 4 : An elevated Command Prompt Window will appear there type “chkdsk c: /f /r /x” followed by “Enter”.
Method 2: Update Or Reinstall Drivers
Outdated disk driver is another reason for the Bad System Config Info error. Therefore, updating drivers is necessary to ensure that all components have the latest version.
Step 1 : Go to the “Start” and then in the search type “device manager” followed by “Enter”. Results in opening the device manager.
Step 2 : Navigate to the “Disk Driver” menu and to the target disk right-click on it and select “Properties”.
Step 3 : Now you can see the Properties window, look for the “Driver” tab and click on it followed by selecting “Update Driver”.
Step 4 : This will open the wizard and give you two options:
- To search online automatically
- To browse to the driver software on your computer
Step 5 : If you are selecting Search automatically in order to update then select Update Driver.
Method 3: bcdedit Command
BCDEdit is a command-line tool for managing BCD stores. When Windows Boots Properly, you can use the following BCDEdit Command Line Tool.
Step 1: Go to the Search box and type “cmd”. Now on the “Command Prompt” right click to select “Run as administrator”.
Step 2: Type BCDEdit command in the Command Prompt and then click “Enter”. As the command executes successfully you can shut down the command prompt.
In case when Windows Fails to Boot, use the following BCDEdit Command Line Tool.
Step 1: Connect a Bootable USB drive to your computer and turn on your System.
Step 2: In BIOS setup, Change the boot order to “Removable Devices” as the first boot choice.
Step 3: Select “Repair your computer” in the Windows installation screen.
Step 4: Then click on “Troubleshoot” then “Advanced Options” and then go for “Command Prompt”.
Step 5: Type the BCDEdit command in the Command Prompt and then click “Enter”.
Method 4: Fix BCD File
In case of damage and trigger BSoD errors, try BCD or MBR. Use the given steps before executing the commands to rebuild BCD and repair MBR.
Step 1 : Insert Windows installation DVD or CD in your computer in order to boot your system.
Step 2 : Then click on “Troubleshoot”, and then “Advanced Options” and lastly “Command Prompt”.
Step 3 : When Command Prompt starts, type the following lines to rebuild BCD and repair MBR.
- bootrec /repairbcd
- bootrec /osscan
- bootrec /repairmbr
Step 4 : Type in “exit” in the end.
Reboot your computer for the changes to take place. Now check for the rebuild and repair of your system.
Method 5: Fix The Registry
Sometimes specific registry issues can give errors, but by following these steps you can repair the registry to resolve the issue.
Step 1 : Insert Windows installation DVD or CD in your computer in order to boot your system.
Step 2 : Then look for “Troubleshoot”, and then click on “Advanced Options” and lastly click on “Command Prompt”.
Step 3 : When Command Prompt start, type the following lines:
cd C:\Windows\System32\config
ren C:\Windows\System32\config\DEFAULT DEFAULT.old
ren C:\Windows\System32\config\SAM SAM.old
ren C:\Windows\System32\config\SECURITY SECURITY.old
ren C:\Windows\System32\config\SOFTWARE SOFTWARE.old
ren C:\Windows\System32\config\SYSTEM SYSTEM.old
Step 4 : Now below the Command Prompt, enter the following line.
copy C:\Windows\System32\config\RegBackDEFAULT C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBackDEFAULT C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBackSAM C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBackSECURITY C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBackSYSTEM C:\Windows\System32\config\
copy C:\Windows\System32\config\RegBackSOFTWARE C:\Windows\System32\config\
Step 5 : By doing this you will copy the registry’s backup by replacing old files. Lastly, close Command Prompt and then restart your system.
Method 6: System Restore
You can go for system restore, if you lack a manual Windows Registry backup to restore. Automatic system restore will be created by Windows as long as the feature is switched on.
Step 1 : Hold together Windows key and S button and then search for restore.
Step 2 : To Open System Properties, Select the “Create A Restore Point Result”.
Step 3 : You should ensure whether protection is on by Opening the System Protection tab, then look for configure settings, and create a restore point.
You can scan for affected programs once Windows System Restore. Select system restore point to scan the list of the programs that are affected or deleted by the system restore.
Method 7: Reset Windows 10
It is better to create a backup before resetting, as it will delete all files from the C partition.
Following steps can help you to reset your Windows.
Step 1 : Go to Start and Click on Power.
Step 2 : Now Hold the Shift button on your keyboard and Click on Restart.
Step 3 : Then click on “Troubleshoot”, and then “Reset this PC” and lastly “Remove everything”.
Step 4 : Lastly click on Reset and it will take a few minutes to complete the process and give you a fresh Windows installation.
It fixes the problem related to your PC’s software.
Conclusion
The causes of this error do not appear to be simple; frequently, the “bad system config info” indicates that you may have issues with your disc drive. In addition, the registry is either damaged or not properly mounted. You can find several methods for resolving the Bad System Config info error.
We recommend that you try all of them before permanently resetting your computer. If the problem persists, seek professional assistance by taking your computer to a nearby repair shop.
