Windows users have been experiencing update issues for quite some time. The updates may fail to initiate in some instances, while in others they may initiate normally before becoming stuck.
Users have reported that their computers can’t automatically restart because Windows Update Stuck at 100%. Unexpected hardware changes, spyware, third-party programme involvement, and corruption issues are only some of the possible causes of this problem.
We have compiled a list of the top six troubleshooting techniques that have been shown to permanently resolve this issue. Choose the one that works best for you now.
Contents
Method 1. Wait for Complete the Task
Some Windows updates may take longer to instal than others, so it’s important to be sure the update is actually stuck and not just taking longer than usual to complete.
The most effective method for this is to simply wait for the process to finish on its own. It’s recommended to wait at least three to four hours after starting the update process before attempting any troubleshooting steps. Some people even let their computers stay on overnight to complete the updates.
We realise that this delay may not be feasible for you, so feel free to use the alternatives outlined below.
Method 2. Disconnect All USB Devices and Restart Your Computer.
First things first, unplug any USB devices that may be attached to your computer. Problems like the one at hand can arise because your computer interprets the presence of additional external devices as a modification to the system’s baseline hardware configuration.
Wait a few minutes after disconnecting all devices to determine if this has any effect. In that case, you might attempt a hard restart of the computer. It is important to note that this procedure requires removing the battery from your laptop, so you should only attempt it if you are comfortable with such a task.
Here’s how to perform a hard reboot on your computer:
Step 1. To turn off your computer, press and hold the power button until the screen goes black.
Step 2. When it has finished shutting down, take out the battery and power cord.
Step 3. After waiting a few minutes, put it back in.
Step 4. Try restarting your computer to check if the problem persists.
Method 3. Restart the Windows Update Service
Windows Update is responsible for managing all updates on your computer, including downloading, installing, and uninstalling them. When updating your OS or its programmes, you may run into problems if this service is stopped or not functioning properly.
In the event that rebooting the computer does not solve the problem, you can attempt resuming the Windows Update service.
Checking that the update service is operational can be done as follows:
Step 1. Open Run by pressing Win + R.
Step 2. Enter services.msc when prompted in Run.
Step 3. Locate the Windows Update service with a right click in the new window that opens.
Step 4. In order to access the Properties menu, right-click and select the option.
The Stop button can be found in the Properties dialogue.
Step 5. Do not immediately press the Start button again; rather, wait a few seconds.
Pick Automatic from the selection that appears when you open the dropdown menu for Startup type.
Step 6. In order to permanently implement the new settings, use the Apply > OK button.
Method 4. Conduct a Virus Scan
It’s also possible that a virus or file corruption problem is stopping you from updating your OS.
If you’re worried about this, a system scan with your antivirus software is a good way to find out for sure. It is possible to use the Command Prompt to launch system-integrated repair tools such as SFC, DISM, and CHKDSK in the absence of a dedicated security suite.
However, if you are having trouble with even the most fundamental aspects of Windows, you should first try booting into Repair Mode. Click Troubleshoot > Advanced options once you’re in Repair Mode. The scans can then be executed by selecting Command Prompt from the menu.
If any problems are found, these tools will try to fix them automatically. Verify if the problem still exists after the scans have been run.
Method 5. Launch Windows’s Update Troubleshooter
The Windows Update troubleshooter is another solution that has helped people resolve the issue. Windows Update Troubleshooter is a built-in programme developed by Microsoft to resolve problems with installing or reinstalling Windows updates.
See below for instructions on how to use it.
Step 1. The Windows Settings can be accessed by pressing Win + I.
Step 2. Then, in the right pane of the window, select Other troubleshooters from the Troubleshoot menu.
Step 3. When the next window appears, look for Windows Update troubleshooter and then click the Run option next to it.
Step 4. The error scanner will now begin scanning the system for problems. It checks for problems and suggests solutions if any are found. If that is the case, then select the Apply this fix option.
If it doesn’t, then it’s time to click Exit to close the troubleshooter and try another solution.
Method 6. Start Up in Safe Mode
When Windows is started in “Safe Mode,” it loads with a minimal set of drivers and applications. Users can check to see if a problematic process is running in the background by switching to troubleshooting mode.
This procedure entails first restarting the computer in Repair Mode’s Safe Mode before proceeding with a regular restart. We pray this solves the current issue.
The necessary steps are as follows:
Step 1. To access the Advanced Startup screen, continuously hit the F11 key when in the Configuration screen.
Step 2. Select Startup settings by going to Troubleshoot > Advanced options.
Step 3. To restart, select the Restart option in the new window that opens.
Step 4. Please press the F5 key on your keyboard to continue. A successful Safe Mode startup will result from pressing this button.
Step 5. In Safe Mode, restart the computer as you normally would.
The trouble shouldn’t show up again after a restart. To ensure the upgrades went smoothly, you can now verify their presence. If they haven’t been installed automatically, you can avoid this problem in the future by installing them from the Microsoft Update Catalog.
Get Back to Updating
One of the aforementioned approaches should be useful, we hope. However, if you’ve gotten this far without success, it’s probably time to execute a full system reset, as the problem is likely caused by a component that cannot be fixed with the typical troubleshooting techniques.
