The WYZE Cam V3 is a popular choice for indoor and outdoor security, known for its affordability, high-quality imaging, and user-friendly interface.

But users often have questions regarding the device’s LED indicators, especially when the red light stays on.

This article will delve into what it means when the WYZE Cam V3’s red light stays on, its possible causes, and if it indicates someone is watching.

WYZE Cam V3 Red Light Stays On


WYZE Cam V3 Red Light: What Does it Mean?

In normal operation, the WYZE Cam V3 uses a series of LED light indicators to communicate its status to users. The red light on the WYZE Cam V3 usually indicates one of two things:

  1. Camera Startup: When the camera is booting up, you may notice a solid red light. This typically goes away once the startup process is complete.
  2. No Network Connection: A solid red light might also indicate that the camera is powered on but is not connected to the internet.

Therefore, if your WYZE Cam V3’s red light stays on, it suggests a potential issue with your network connection.

Why the WYZE Cam V3 Red Light Stays On: Possible Causes

If your WYZE Cam V3’s red light is persistently on, it’s likely due to one of the following reasons:

  1. Internet Connectivity Issues: The most common reason for a continuous red light is an issue with your internet connection. The camera might not be connecting to your Wi-Fi network.
  2. Router Issues: If your router is malfunctioning or if it’s not distributing network access correctly, your WYZE Cam V3 might display a persistent red light.
  3. WYZE Cam V3 Setup Problems: If your camera hasn’t been set up properly or if it’s not connecting to the WYZE app, this could result in a red light.

How to Resolve the Red Light Issue

If your WYZE Cam V3’s red light is continuously on, you can try the following troubleshooting steps:

  1. Check Your Internet Connection: Ensure your Wi-Fi network is working correctly. Try connecting other devices to the network to confirm its functionality.
  2. Restart Your Router: Sometimes, a simple restart of your router can resolve any connectivity issues.
  3. Restart Your WYZE Cam V3: Turn off the WYZE Cam V3, wait for a few seconds, and then turn it back on to see if the red light persists.
  4. Reset Your WYZE Cam V3: As a last resort, you can factory reset your WYZE Cam V3. Please note that this will erase all settings, and you will have to set up your camera again.

Red Light and Viewing Activity: Is Someone Watching?

It’s important to note that the red light on your WYZE Cam V3 does not indicate that someone is watching the live stream. WYZE Cams don’t have any LED indicators that show when the live feed is being viewed.

If you share your camera feed with others and are concerned about privacy, you’ll need to check the app for active viewers.


If your WYZE Cam V3’s red light stays on, it’s likely signaling a connectivity issue rather than indicating active viewers.

By troubleshooting your internet connection and possibly resetting your camera, you can resolve most persistent red light issues and get your WYZE Cam V3 back to its vigilant duty.

If you continue to face problems, don’t hesitate to reach out to WYZE’s customer support for further assistance.