There Was A Problem Resetting your PC in Windows 10

There Was A Problem Resetting your PC: Only some version of Windows OS like Windows 10, 8 and 8.1 offers the unique feature, “Reset your PC”. This is a tremendously useful feature. This helps your PC to get a Factory Reset i.e. your Windows PC’s default configuration is restored. This feature comes in handy while dealing with nagging errors that are not easily solved.

The only other way to solve these stubborn errors is to reinstall Windows again but that is another headache. So, Resetting your PC is a much smarter and faster choice in comparison to installing Windows again from scratch.

There Was A Problem Resetting your PC in Windows 10

What Can Cause There Was A Problem Resetting your PC Error?

Many times it has been complained by many Windows users that their PC is failing to Reset and instead of the error message “There was a problem resetting your PC” is displayed on a blue screen and below it has been informed that no changes were made. But after this happens the users fail miserably to boot in the Windows system.

What Are the Causes Behind There Was A Problem Resetting your PC Error?

This error can be caused by several reasons but the most significant causes were pointed out by Microsoft themselves, they are:

  1. Your PC was not upgraded to Windows 10 from any previous versions of Windows. It had Windows 10 preinstalled in the system.
  2. A USB recovery drive was created using the Windows 10 feature “Create a recovery drive”.
  3. The disk space used up by the preinstalled applications was compressed by the manufacturers.
  4. Troubleshoot → Reset this PC → Remove Everything, these steps were followed after booting your PC’s contents to a USB drive for recovery.

The above mention reasons could cause the failure of the process of resetting your PC and display the message “There was a problem resetting your PC” on your Window. So, now in the latter part of this article, we will go over all the possible ways to fix There Was A Problem Resetting your PC error in a detailed step-by-step manner to make sure you can reset your PC normally without any hassle in no time.

How to Fix There Was A Problem Resetting your PC Error

Solution 1: Run Startup/Automatic Repair

Step 1: Start with inserting the bootable disk for Windows 10.

Step 2: Now Restart your PC.

Step 3: When a prompt message appears on the screen, press any key to continue.

Step 4: Then select the language of your preference.

Step 5: Look for the Repair option at the bottom left corner of the screen and click on it.

Step 6: After that select the option Troubleshoot.

Step 7: Then you should click on the Advanced Option.

Step 8: Now click on the Automatic Repair option from the advanced options window.

Step 9: Wait for the Automatic Repair process to complete.

Step 10: Restart your PC.

This will most likely solve the issue but if you are still having the same problem then try the other mentioned methods.

Solution 2: Fix Boot Image And Rebuild BCD

Step 1: To start, insert the bootable disk for Windows 10 and now Restart your PC.

Step 2: When a prompt message appears on the screen, press any key to continue.

Step 3: Then select the language of your preference.

Step 4: Look for the Repair option at the bottom left corner of the screen and click on it.

Step 5: After that select the option Troubleshoot.

Step 6: Then you should click on the Advanced Option.

Step 7: Now click on Command Prompt option from the advanced options window.

Step 8: And then type the following commands hitting enter in between each one.

bootrec.exe /FixMbr

bootrec.exe /FixBoot

bootrec.exe /RebuildBcd

Step 9: If the above commands don’t work then you can the following commands instead

bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

Step 11: At last Restart your PC after exiting the cmd.

Solution 3: Run System File Checker (SFC) and Check Disk (CHKDSK)

Step 1: To start, insert the bootable disk for Windows 10.

Step 2: Now Restart your PC.

Step 3: When a prompt message appears on the screen, press any key to continue.

Step 4: Then select the language of your preference.

Step 5: Look for the Repair option at the bottom left corner of the screen and click on it.

Step 6: After that select the option Troubleshoot.

Step 7: Then you should click on the Advanced Option.

Step 8: Now click on Command Prompt option from the advanced options window.

Step 9: And then type the following commands hitting enter in between each one.

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x

Step 10: At last Restart your PC after exiting the cmd.

Solution 4: Perform a System Restore

Step 1: To start, insert the bootable disk for Windows 10.

Step 2: Now Restart your PC.

Step 3: When a prompt message appears on the screen, press any key to continue.

Step 4: Then select the language of your preference.

Step 5: Look for the Repair option at the bottom left corner of the screen and click on it.

Step 6: After that select the option Troubleshoot.

Step 7: Then you should click on the Advanced Option.

Step 8: Click on the System Restore option.

Step 9: Now do as instructed on the screen to complete the process of restoring.

Step 10: Finally Restart your computer and check whether you are getting the same error message while Resetting your PC or not.

Solution 5: Rename the System and Software Registry Hives

Step 1: To start, insert the bootable disk for Windows 10.

Step 2: Now Restart your PC.

Step 3: When a prompt message appears on the screen, press any key to continue.

Step 4: Then select the language of your preference.

Step 5: Look for the Repair option at the bottom left corner of the screen and click on it.

Step 6: After that select the option Troubleshoot

Step 7: Then you should click on the Advanced Option

Step 8: Now click on Command Prompt option from the advanced options window

Step 9: And then type the following commands hitting enter in between each one

cd %windir%\system32\config

ren system system.001

ren software software.001

Step 10: Now the Windows Recovery Environment window will open as soon as you exit cmd

Step 11: Finally to boot your PC click on the Continue option and this will most likely fix the There was a problem resetting your PC error

Solution 6: Recover From Drive

Disclaimer: If you try this method then you might lose all of your personal files. So, try this method at serious consideration.

Step 1: Plugin the USB recovery drive you have.

Step 2: Now Restart your PC.

Step 3: When a prompt message appears on the screen, press any key to continue.

Step 4: Then select the language of your preference.

Step 5: Look for the Repair option at the bottom left corner of the screen and click on it.

Step 6: After that select the option Troubleshoot.

Step 7: Then you should click on the Advanced Option.

Step 8: Now click on the System Image Recovery option from the advanced options window.

Step 9: And then do as instructed on the screen to complete the process.

Solution 7: Recover your PC Using Recovery USB

Step 1: Start with plugging the USB recovery drive you have.

Step 2: In the cmd, type in Notepad and hit Enter.

Step 3: Go to Open option on the File menu.

Step 4: Look for the USB recovery drive you are using for the booting process.

Step 5: Type in the letter of the drive, for example, F or G. Hit Enter.

Step 6: After that type in Setup and again hit the Enter.

Step 7: The Windows Installation window will open now.

Step 8: Do as instructed on the screen to reinstall Windows.

Restart the PC after the process is completed to make sure the There was a problem resetting your PC error is fixed.

Solution 8: Repair Install Windows 10

It might happen that none of the above-mentioned methods to repair the issue work for you, in that case, the only solution you are left with is to Repair install Windows. If even that doesn’t work then you can try to Install Windows completely from scratch.

When this happens you should understand that the problem with your PC is not HDD related but related to your operating system or the BDC on the HDD was erased by mistake.

The mentioned steps for the methods are easy to conduct and can be performed yourself. Although if you come to face any constraints while following the mentioned steps then it is advisable to consult someone with more technical knowledge.

Recommended:

Conclusion

One of the above-mentioned methods should be enough to fix There was a problem resetting your PC error. If not so then you should definitely consult an expert or lodge a complaint with Microsoft.

LEAVE A REPLY

Please enter your comment!
Please enter your name here