WiFi Doesn’t Have A Valid IP Configuration {Fixed}

It becomes very disheartening for a user to encounter the WiFi Doesn’t Have A Valid IP Configuration error. Also, it is frustrating not to be able to access the Internet because of this error. And it gets even more bizarre when you troubleshoot for problems and is only presented with the obvious issue at hand and not the solution or fix to WiFi Doesn’t Have A Valid IP Configuration Windows 10.

WiFi Doesn't Have A Valid IP Configuration Windows 10

How to Fix WiFi Doesn’t Have A Valid IP Configuration in Windows 10

We have come up with this article to help get past Wi-Fi Doesn’t Have A Valid IP Configuration error and keep up with the Internet like you deserve to be. The problem can be due to several reasons like incorrect network settings, faulty network drivers, or something else.

This error is very similar to Ethernet Doesn’t Have A Valid IP Configuration. Therefore, some of the methods are same and they are working. Let’s just dive right into it.

Solution 1 – Releasing and Renewing IP Address

The WiFi doesn’t have a valid IP configuration error may sound like a strange problem, but it is one of the most frustrating errors faced by any user. If there is a problem with the network itself, this method is the best possible solution.

Step 1: Open the Command Prompt as an administrator by pressing the Windows Key + X together.

Step 2: Enter the command “ipconfig /release” in the black screen popped up

Step 3: Also, type “ipconfig /renew” as a command.

Step 4: Pressing Enter would conclude the command prompt’s job.

Solution 2 – Reset TCP/IP

Resetting the TCP/IP is one of the most preferred solutions by the users encountering WiFi Doesn’t Have A Valid IP Configuration Windows 10 error.

Step 1: Open the Command Prompt as an administrator by pressing the Windows Key + X together.

Step 2: Use the following commands one by one:

netsh winsock reset
netsh int ip reset

Step 3: Restart your system.

You must ensure Wired Autoconfig service and the WLAN autoconfig service are running, and their Startup type is set Automatically if the presented error isn’t solved yet.

Step 1: On your keyboard, press the Win + R simultaneously to invoke the run box.

Step 2: Enter “services.msc” and click on OK.

Step 3: Select “Wired Autoconfig” to open the Properties window.

Step 4: Check whether “Startup type” is “Automatic,” and the Service status is “Running” and, if not, make the necessary changes as per this instruction.

Step 5: After changing the settings, press on the Apply button.

Step 6: Double-click on WLAN AutoConfig.

Step 7: Ensure the Startup type is Automatic, and the Service status is Running as previously instructed. After you change the settings, click the Apply button.

Step 8: Restart your system.

Solution 3 – Set your IP Address manually

If you are one of the users who set up a home network with several systems connected to the same, the computer automatically assigns an IP address for each of the connected systems. Resetting the IP of the computer having the network problem seems to fix the solution.

Step 1: First of all, open Control Panel and select the Network and Sharing Center.

Step 2: After that, choose Change adapter settings.

Step 3: Next, right-click on a WiFi connection and click on Properties.

Step 4: Choose Internet Protocol Version 4 (TCP/IPv4) and then select Properties.

Step 5: Following, select “Use the following IP address,” then set IP address to 192.168.1.x where x can be any digit. It is recommended to choose 192.168.1.14. After that, set a Subnet mask to 255.255.255.0 and set an IP gateway to 192.168.1.1.

Step 6: After that, set the “Preferred DNS server” under “Use the following DNS server addresses” to 208.67.222.222 and set the “Alternate DNS server” to 208.67.220.220.

Step 7: Lastly, select OK to implement the changes.

Solution 4 – Uninstall Wireless Adapter Driver

Network drivers are also one of the primary reasons for Wi-Fi doesn’t have a valid IP configuration error. Uninstalling and reinstalling the driver is the way to go. A simple guide for the same is as follows:

Step 1: Firstly, go to Device Manager.

Step 2: Then, open “Network adapters” Uninstall them by clicking on the wireless device itself.

Step 3: Select OK to confirm the uninstallation. Ensure that the box saying “Delete the driver software for this device.” At the bottom corner is checked before pressing OK.

Step 4: Lastly, restart your system to bring into effect the changes at hand.

Recommended:

Final Words

It is imperative in today’s world to be able to have access to high-speed Internet as this guarantees the completion of work. Furthermore, the Internet is full of different kinds of solutions in different types of problems. However, you need to access the Internet first, and WiFi Doesn’t Have A Valid IP Configuration error is therefore greeted with much hostility as it severs the internet connection of your system.

Also, this article aims at the smooth revival of the internet connection by tackling the various hindrance of faulty drivers or that of incorrect network settings. We urge you to stay cautious and not let these errors ruin your networks and system.

Thank You For Reading!